| 型号 | 制造商 | 描述 | 价格 | 封装 | 批号 | 数量 |
|
ADM7160ACPZN1.8-R2
|
Analog Devices | input. The ADM7160 is specifically designed for stable operation with tiny 1 μF, ±30% ceramic input and output capacitors to meet the requirements of high | 0.0000 | LFCSP-6 | 1115+ | 9365 |
|
ADM7154ARDZ-3.0-R7
|
Analog Devices | egulator typical output noise is 0.9 μV rms from 100 Hz to 100 kHz for fixed output voltage options and 1.5 nV/√Hz for noise spectral density from 10 | 0.0000 | 1115+ | 7876 | |
|
ADM7154ACPZ-3.3-R7
|
Analog Devices | egulator typical output noise is 0.9 μV rms from 100 Hz to 100 kHz for fixed output voltage options and 1.5 nV/√Hz for noise spectral density from 10 | 0.0000 | SOT23-6 | 1115+ | 1763 |
|
ADM7150ARDZ-3.3-R7
|
Analog Devices | proprietary architecture, they provide high power supply rejection, low noise, and achieve excellent line and load transient response with a 10 μF ceramic | 0.0000 | SOP | 1115+ | 2443 |
|
ADM7150ACPZ-5.0-R7
|
Analog Devices | available upon request. The ADM7150 regulator typical output noise is 1.0 μVrms from 100Hz to 100KHz for fixed output voltage options and <1.7nV/√Hz | 0.0000 | LFCSP-8 | 1115+ | 7759 |
|
ADM7150ACPZ-3.3-R7
|
Analog Devices | available upon request. The ADM7150 regulator typical output noise is 1.0 μVrms from 100Hz to 100KHz for fixed output voltage options and <1.7nV/√Hz | 0.0000 | LFCSP | 1115+ | 7190 |
|
ADM7150ACPZ-1.8-R7
|
Analog Devices | proprietary architecture, they provide high power supply rejection, low noise, and achieve excellent line and load transient response with a 10 μF ceramic | 0.0000 | LFCSP-8 | 1115+ | 6413 |
|
ADM6713TAKSZ-REEL7
|
Analog Devices | -down, and whenever the supply voltage falls below a preset threshold. In addition, both parts have a debounced manual reset input so that a reset signal | 0.0000 | 1115+ | 1313 | |
|
ADM6713MAKSZ-REEL7
|
Analog Devices | ADM6711/ADM6713 are suitable for monitoring 2.5 V, 3 V, 3.3 V, and 5 V supplies. A reset timeout of at least 140 ms occurs when VCC rises above the | 0.0000 | SC70-4 | 1115+ | 7962 |
|
ADM6713LAKSZ-REEL7
|
Analog Devices | ADM6711/ADM6713 are suitable for monitoring 2.5 V, 3 V, 3.3 V, and 5 V supplies. A reset timeout of at least 140 ms occurs when VCC rises above the | 0.0000 | AD | 1115+ | 4072 |
|
ADM6711MAKSZ-REEL7
|
Analog Devices | -down, and whenever the supply voltage falls below a preset threshold. In addition, both parts have a debounced manual reset input so that a reset signal | 0.0000 | SOT343 | 1115+ | 7604 |
|
ADM6710QARJZ-REEL7
|
Analog Devices | Processor Supervisor Adj 1.8V/2.5V/3V/3.3V/5V 6-Pin SOT-23 T/R | 0.0000 | 1115+ | 4797 | |
|
ADM6710KARJZ-REEL7
|
Analog Devices | . Once all voltages rise above the selected threshold level, the reset signal remains low for the reset timeout period (200 ms typical). The ADM6710 | 0.0000 | SOT23-6 | 1115+ | 5816 |
|
ADM6710JARJZ-REEL7
|
Analog Devices | voltages rise above the selected threshold level, the reset signal remains low for the reset timeout period (200 ms typical). The ADM6710 output remains | 0.0000 | SOT-23-6 | 1115+ | 7678 |
|
ADM6710IARJZ-REEL7
|
Analog Devices | voltages rise above the selected threshold level, the reset signal remains low for the reset timeout period (200 ms typical). The ADM6710 output remains | 0.0000 | 6ldSOT-23 | 1115+ | 5338 |
|
ADM6710FARJZ-REEL7
|
Analog Devices Inc. | IC SUPERVISOR 4 CHANNEL SOT23-6 | 0.0000 | SOT23-6 | 1115+ | 1799 |
|
ADM6710EARJZ-REEL7
|
Analog Devices | voltages rise above the selected threshold level, the reset signal remains low for the reset timeout period (200 ms typical). The ADM6710 output remains | 0.0000 | SOT23-6 | 1115+ | 5490 |
|
ADM6710DARJZ-REEL7
|
Analog Devices | Processor Supervisor 4.63V/3.08V/1.67V/Adj 4 Active Low/Open Drain 6-Pin SOT-23 T/R | 0.0000 | SOT23-6 | 1115+ | 3188 |
|
ADM6710CARJZ-REEL7
|
Analog Devices | voltages rise above the selected threshold level, the reset signal remains low for the reset timeout period (200 ms typical). The ADM6710 output remains | 0.0000 | SOT23-6 | 1115+ | 8264 |
|
ADM6384YKS46D2Z-R7
|
Analog Devices | timeout periods are 1 ms, 20 ms, 140 ms, and 1120 ms. The ADM6384 is available in a 4-lead SC70 package and typically consumes only 7 μA, making it | 0.0000 | SOT-343 | 1115+ | 6263 |
为避免我们发出的报价单被系统误认为垃圾邮件，
我们建议您先把
liyouxingdz@qq.com添加到邮箱联系人或者白名单。
服务热线
