| 型号 | 制造商 | 描述 | 价格 | 封装 | 批号 | 数量 |
|
FAN54041UCX
|
onsemi | connection. The power path circuit ensures that the system rail stays up when the charger is plugged in, even if the battery is dead or shorted.The | 0.0000 | WLCS | 1115+ | 2169 |
|
FAN54040UCX
|
onsemi | host through the I2C port. Dynamic input voltage control prevents a weak adapter’s voltage from collapsing, ensuring charging capability from such adapters.The FAN5404X is available in a 25-bump, 0.4 mm pitch, WLCSP package." | 0.0000 | 1115+ | 8374 | |
|
FAN54013UCX
|
onsemi | time, the input current is limited to the value set through the I2C host. Charge termination is determined by a programmable minimum current level. A | 0.0000 | BGA | 1115+ | 4921 |
|
FSA831AL10X
|
onsemi | Dedicated Charging Port (DCP), Charging Downstream Port (CDP), or a typical PC host, called a Standard Downstream Port (SDP), is connected. If a charger is | 0.0000 | 1115+ | 8507 | |
|
FAN54300UCX
|
onsemi | from the system. The boost regulator includes a soft-start that limits inrush current from the battery.The FAN5430X are available in a 30-bump, 0.4 mm pitch, wafer-level, chip-scale package (WLCSP). | 0.0000 | SMD | 1115+ | 6107 |
|
FAN5421BUCX
|
onsemi | determined by a programmable minimum current level. A safety timer with reset control provides a safety backup for the I2C host. The IC automatically adapts | 0.0000 | QFN | 1115+ | 8820 |
|
FAN54151UCX
|
onsemi | configurable interrupts.Additionally, the FAN54151 includes an integrated temperature sensor and battery cell voltage monitor that provides additional protection.The FAN54151 utilizes a 20-Bump, 0.5 mm pitch WLCSP package. | 0.0000 | WLCSP20 | 1115+ | 2679 |
|
FAN5405BUCX
|
onsemi | USB-Compliant Single Cell Li-Ion Switching Charger with USB-OTG Boost Regulato | 0.0000 | WLCSP | 1115+ | 5256 |
|
FAN5403BUCX
|
onsemi | attery falls below an internal threshold. If the input source is removed, the IC enters a high-impedance mode with leakage from the battery to the input | 0.0000 | QFN | 1115+ | 4037 |
|
FAN54020UCX
|
onsemi | USB-Compliant 1.5 A Single-Cell Li-Ion Switching Charger with DBP and OTG Boost | 0.0000 | 1115+ | 2090 | |
|
FAN54015UCX
|
onsemi | includes over-voltage protection, a highly efficient DC-DC synchronous converter with a 1.45 A output at 4.2 V, sufficient to charge up to 2000 mAh Li-Ion | 0.0000 | WLCSP20 | 1115+ | 7306 |
|
FAN54005UCX
|
onsemi | , the input current limit can be changed through the I2C interface by the host processor. Charge termination is determined by a programmable minimum | 0.0000 | WLCSP-20 | 1115+ | 9434 |
|
FAN54511AUCX
|
onsemi | automatically restart the charge cycle when the battery falls below a restart voltage threshold. If the input source is removed, the IC enters a high | 0.0000 | 1115+ | 4153 | |
|
FAN54015BUCX
|
onsemi | includes over-voltage protection, a highly efficient DC-DC synchronous converter with a 1.45 A output at 4.2 V, sufficient to charge up to 2000 mAh Li-Ion | 0.0000 | WLCSP-20 | 1115+ | 6786 |
|
FAN54013BUCX
|
onsemi | USB-Compliant Single Cell Li-Ion Switching Charger with USB-OTG Boost Regulato | 0.0000 | QFN | 1115+ | 3665 |
|
FSA832L10X_F131
|
onsemi | TAPE REEL/USB 2.0 High Speed Charger Detection with Isolation | 0.0000 | 10-MicroP | 1115+ | 1592 |
|
DS2788E+T&R
|
Maxim Integrated | IC FUEL GAUGE W/DSP DRV 14TSSOP | 0.0000 | 1115+ | 6728 | |
|
DS2786G+T&R
|
Maxim Integrated | Battery Management Stand-Alone OCV Based Fuel Gauge | 0.0000 | 1115+ | 7973 | |
|
DS2784G+T&R
|
Maxim Integrated | IC FUEL GAUGE STND-ALONE 14-TDFN | 0.0000 | 1115+ | 1777 | |
|
DS2782G+T&R
|
Maxim Integrated | Battery Management Stand-Alone Fuel Gauge | 0.0000 | NEWANDORI | 1115+ | 7900 |
为避免我们发出的报价单被系统误认为垃圾邮件，
我们建议您先把
liyouxingdz@qq.com添加到邮箱联系人或者白名单。
服务热线
