| 型号 | 制造商 | 描述 | 价格 | 封装 | 批号 | 数量 |
|
ADP2138ACBZ-3.0-R7
|
Analog Devices Inc. | Voltage Regulators - Switching Regulators Compact 800mA 3MHz Step-Down | 0.0000 | AD-2017 | 1115+ | 3803 |
|
ADP2138ACBZ-2.8-R7
|
Analog Devices Inc. | Voltage Regulators - Switching Regulators Compact 800mA 3MHz Step-Down | 0.0000 | AD-2017 | 1115+ | 1230 |
|
ADP2138ACBZ-2.5-R7
|
Analog Devices | ), improving light load efficiency. The ADP2138/ADP2139 operate on input voltages of 2.3 V to 5.5 V, which allows for single lithium or lithium polymer cell | 0.0000 | 6BallWLCS | 1115+ | 4028 |
|
ADP2138ACBZ-1.5-R7
|
Analog Devices Inc. | Voltage Regulators - Switching Regulators Compact 800mA 3MHz Step-Down | 0.0000 | 1115+ | 7497 | |
|
ADP2138ACBZ-1.2-R7
|
Analog Devices Inc. | Voltage Regulators - Switching Regulators Compact 800mA 3MHz Step-Down | 0.0000 | 1115+ | 7422 | |
|
ADP2138ACBZ-1.0-R7
|
Analog Devices | ), improving light load efficiency. The ADP2138/ADP2139 operate on input voltages of 2.3 V to 5.5 V, which allows for single lithium or lithium polymer cell | 0.0000 | 6-WLCSP1. | 1115+ | 6094 |
|
ADP2138ACBZ-0.8-R7
|
Analog Devices Inc. | Voltage Regulators - Switching Regulators Compact 800mA 3MHz Step-Down | 0.0000 | 6BallWLCS | 1115+ | 3923 |
|
ADP2127ACNZ1.260R7
|
Analog Devices | the source. The ADP2126/ADP2127 have an input voltage range of 2.1 V to 5.5 V, allowing the use of single Li+/Li polymer cell, three-cell alkaline, NiMH | 0.0000 | EMBEDDEDW | 1115+ | 7592 |
|
ADP2127ACNZ-1.20R7
|
Analog Devices | are enabled by a 6 MHz to 27 MHz external clock signal applied to the EXTCLK pin. Certain models can also be enabled with a logic high signal. When the | 0.0000 | EMBEDDEDW | 1115+ | 5046 |
|
ADP2121ACBZ-2.3-R7
|
Analog Devices | controlled shutdown (EN = 0.4 V), the input is disconnected from the output and draws less than 0.3 µA current (typical) from the source. The ADP2121 has an | 0.0000 | AD-2017 | 1115+ | 4640 |
|
ADP2121ACBZ-1875R7
|
Analog Devices | input voltage range of 2.3 V to 5.5 V (2.9 V to 5.5 V for VOUT = 2.3 V), allowing the use of a single Li+/Li- polymer cell, 3-cell alkaline or Ni-MH | 0.0000 | AD-2017 | 1115+ | 9405 |
|
ADP2121ACBZ-1.85R7
|
Analog Devices | controlled shutdown (EN = 0.4 V), the input is disconnected from the output and draws less than 0.3 µA current (typical) from the source. The ADP2121 has an | 0.0000 | AD-2017 | 1115+ | 5224 |
|
ADP2121ACBZ-1.82R7
|
Analog Devices | controlled shutdown (EN = 0.4 V), the input is disconnected from the output and draws less than 0.3 µA current (typical) from the source. The ADP2121 has an | 0.0000 | 1115+ | 2116 | |
|
ADP2121ACBZ-1.8-R7
|
Analog Devices | controlled shutdown (EN = 0.4 V), the input is disconnected from the output and draws less than 0.3 µA current (typical) from the source. The ADP2121 has an | 0.0000 | 6-WLCSP | 1115+ | 1517 |
|
ADP2120ACPZ-1.8-R7
|
Analog Devices | less than 3 μA current from the input source when it is disabled. Other key features include under voltage lockout(UVLO), integrated soft start to limit | 0.0000 | 10-LeadLF | 1115+ | 9045 |
|
ADP2120ACPZ-1.5-R7
|
Analog Devices | less than 3 μA current from the input source when it is disabled. Other key features include under voltage lockout(UVLO), integrated soft start to limit | 0.0000 | 10-LeadLF | 1115+ | 2240 |
|
ADP2120ACPZ-1.2-R7
|
Analog Devices | 1.25 A, 1.2 MHZ, SYNCHRONOUS, ST | 0.0000 | LFCSP-10 | 1115+ | 2958 |
|
ADP2119ACPZ-1.5-R7
|
Analog Devices | less than 3 μA current from the input source when it is disabled. Other key features include under voltage lockout(UVLO), integrated soft start to | 0.0000 | 10ldLFCSP | 1115+ | 1492 |
|
ADP2119ACPZ-1.0-R7
|
Analog Devices | The ADP2119/ADP2120 are low quiescent current, synchronous, step-down DC-to -DC regulators in a compact 3mm x 3mm LFCSP_WD package. Both Devices use | 0.0000 | 10ldLFCSP | 1115+ | 4541 |
|
ADP2118ACPZ-2.5-R7
|
Analog Devices | Conv DC-DC 2.3V to 5.5V Step Down Single-Out 2.5V 3A 16-Pin LFCSP EP T/R | 0.0000 | 1115+ | 8256 |
为避免我们发出的报价单被系统误认为垃圾邮件，
我们建议您先把
liyouxingdz@qq.com添加到邮箱联系人或者白名单。
服务热线
