| 型号 | 制造商 | 描述 | 价格 | 封装 | 批号 | 数量 |
|
BZV6-2RN62
|
Honeywell | product in most environments. The E6/V6 family of switches incorporates the MICRO SWITCH BZ switch element which has the reliable snap-spring mechanism. The | 0.0000 | 1115+ | 1310 | |
|
BZV6-2RN34
|
Honeywell | MICRO SWITCH E6/V6 Series Medium-Duty Limit Switches, Top Roller Plunger Actuator, 1NC 1NO SPDT Snap Action, 0.5 in - 14NPT conduit MICRO SWITCH E6 | 0.0000 | 1115+ | 8940 | |
|
BZV6-2RN28
|
Honeywell | MICRO SWITCH™ E6 (side mount) and V6 (flange mount) switches are offered with or without actuator seal boots. Both have a combination insulator/seal | 0.0000 | 1115+ | 5236 | |
|
BZV6-2RN18
|
Honeywell | Contact Current AC:15A; Max Contact Current DC:500mA; Terminal Type:Screw; Contact Configuration:SPDT-1NC/1NO; Contact Current Rating:15A; Series:V6; Termination Type:Screw | 0.0000 | 1115+ | 3188 | |
|
BZV6-2RN-S
|
Honeywell | (actuators with boots) E6 Series switches are preferred for applications where there could be exposure to liquid and/or particulate environments. The general | 0.0000 | 1115+ | 4967 | |
|
BZV6-2RN-C
|
Honeywell | (actuators with boots) E6 Series switches are preferred for applications where there could be exposure to liquid and/or particulate environments. The general | 0.0000 | 1115+ | 5333 | |
|
BZLN-2-RH5
|
Honeywell | . Acutator position: The RH or LH suffix on the end of the catalog listing means the actuator is to the right or left side of the switch as viewed from the nameplate. | 0.0000 | 1115+ | 9642 | |
|
BZLN-2-RH3
|
Honeywell | . Acutator position: The RH or LH suffix on the end of the catalog listing means the actuator is to the right or left side of the switch as viewed from the nameplate. | 0.0000 | TEJIA | 1115+ | 8444 |
|
BZLN-2-LH5
|
Honeywell | . Acutator position: The RH or LH suffix on the end of the catalog listing means the actuator is to the right or left side of the switch as viewed from the nameplate. | 0.0000 | 1115+ | 6812 | |
|
BZLN-2-LH3
|
Honeywell | . Acutator position: The RH or LH suffix on the end of the catalog listing means the actuator is to the right or left side of the switch as viewed from the nameplate. | 0.0000 | 1115+ | 8471 | |
|
BZLN-10-RH
|
Honeywell | position: The RH or LH suffix on the end of the catalog listing means the actuator is to the right or left side of the switch as viewed from the nameplate. | 0.0000 | 1115+ | 1074 | |
|
BZLN-10-LH
|
Honeywell | position: The RH or LH suffix on the end of the catalog listing means the actuator is to the right or left side of the switch as viewed from the nameplate. | 0.0000 | 1115+ | 6095 | |
|
BZH1-2RN62
|
Honeywell | MICRO SWITCH BZG/BZH Series Enclosed Switches, Low Force Rod Actuator, Low Force Rod, 1NC/1NO SPDT Snap Action, 1/2 in - 14NPT conduit MICRO SWITCH | 0.0000 | 1115+ | 4486 | |
|
BZG1-2RN80
|
Honeywell Sensing and Productivity Solutions | Limit Switches LIMIT SWITCH | 0.0000 | 1115+ | 3355 | |
|
BZG1-2RN62
|
Honeywell | MICRO SWITCH BZG/BZH Series Enclosed Switches, Low Force Rod Actuator, Low Force Rod, 1NC/1NO SPDT Snap Action, 1/2 in - 14NPT conduit MICRO SWITCH | 0.0000 | 1115+ | 5334 | |
|
BZG1-2RN34
|
Honeywell | have a neoprene seal gasket between the housing halves, elastomer boot actuators, sealed conduit connectors, and die-cast aluminum housing. Mounting holes are located outside the switch cavity and accept No. 10 screws. | 0.0000 | 1115+ | 7224 | |
|
BZE7-2RN-C
|
Honeywell | limit switch permits installation where there is limited space available on equipment. The SPDT E7/E7S/V7/E9 Series of catalog listings are certified to | 0.0000 | 1115+ | 6446 | |
|
BZE6-RQ8X4
|
Honeywell | (actuators with boots) E6 Series switches are preferred for applications where there could be exposure to liquid and/or particulate environments. The | 0.0000 | 1115+ | 6466 | |
|
BZE6-RQ8X2
|
Honeywell | MICRO SWITCH™ E6 (side mount) and V6 (flange mount) switches are offered with or without actuator seal boots. Both have a combination insulator/seal | 0.0000 | 1115+ | 7031 | |
|
BZE6-RQ2X2
|
Honeywell | MICRO SWITCH™ E6 (side mount) and V6 (flange mount) switches are offered with or without actuator seal boots. Both have a combination insulator/seal | 0.0000 | 1115+ | 2249 |
为避免我们发出的报价单被系统误认为垃圾邮件，
我们建议您先把
liyouxingdz@qq.com添加到邮箱联系人或者白名单。
服务热线
