型号 | 制造商 | 描述 | 价格 | 封装 | 批号 | 数量 |
ADM7171ACPZ-1.8-R7
|
Analog Devices | adjusting the start-up time via the soft start pin. The typical start-up time with a 1 nF soft start capacitor is 1.0 ms. The ADM7171 regulator output | 0.0000 | -40C125CT | 1115+ | 5564 |
ADM7171ACPZ-1.3-R7
|
Analog Devices | just a small 4.7 μF ceramic output capacitor. Load transient response is typically 1.5 μs for a 1 mA to 500 mA load step. The ADM7171 is available in | 0.0000 | 8ldLFCSP( | 1115+ | 3571 |
ADM7170ACPZ-4.2-R7
|
Analog Devices | in 17 fixed output voltage options. The following voltages are available from stock: 1.3 V, 1.8 V, 2.5 V, 3.0 V, 3.3 V, 4.2 V, and 5.0 V. Additional | 0.0000 | 8ldLFCSP( | 1115+ | 7656 |
ADM7170ACPZ-1.3-R7
|
Analog Devices | adjusting the start-up time via the soft start pin. The typical start-up time with a 1 nF soft start capacitor is about 1.0 ms. The ADM7170 regulato | 0.0000 | 8ldLFCSP( | 1115+ | 2536 |
ADM7160AUJZ-3.3-R2
|
Analog Devices | input. The ADM7160 is specifically designed for stable operation with tiny 1 μF, ±30% ceramic input and output capacitors to meet the requirements of high | 0.0000 | TSOT23- | 1115+ | 3702 |
ADM7160AUJZ-2.5-R7
|
Analog Devices | The ADM7160 is an ultralow noise, low dropout linear regulator that operates from 2.2 V to 5.5 V and provides up to 200 mA of output current. The low | 0.0000 | TSOT23- | 1115+ | 5223 |
ADM7160AUJZ-2.5-R2
|
Analog Devices | input. The ADM7160 is specifically designed for stable operation with tiny 1 μF, ±30% ceramic input and output capacitors to meet the requirements of high | 0.0000 | TSOT23- | 1115+ | 8134 |
ADM7160AUJZ-1.8-R7
|
Analog Devices | The ADM7160 is an ultralow noise, low dropout linear regulator that operates from 2.2 V to 5.5 V and provides up to 200 mA of output current. The low | 0.0000 | TSOT23-5 | 1115+ | 5362 |
ADM7160AUJZ-1.8-R2
|
Analog Devices | LDO Regulator Pos 1.8V 0.2A 5-Pin TSOT-23 T/R | 0.0000 | TSOT23-5 | 1115+ | 6875 |
ADM7160ACPZN3.3-R2
|
Analog Devices | input. The ADM7160 is specifically designed for stable operation with tiny 1 μF, ±30% ceramic input and output capacitors to meet the requirements of high | 0.0000 | LFCSP-6 | 1115+ | 8840 |
ADM7160ACPZN2.5-R2
|
Analog Devices | input. The ADM7160 is specifically designed for stable operation with tiny 1 μF, ±30% ceramic input and output capacitors to meet the requirements of high | 0.0000 | LFSCP-6 | 1115+ | 5330 |
ADM7160ACPZN1.8-R7
|
Analog Devices | input. The ADM7160 is specifically designed for stable operation with tiny 1 μF, ±30% ceramic input and output capacitors to meet the requirements of high | 0.0000 | DFN-6 | 1115+ | 8826 |
ADM7154ARDZ-3.3-R7
|
Analog Devices | egulator typical output noise is 0.9 μV rms from 100 Hz to 100 kHz for fixed output voltage options and 1.5 nV/√Hz for noise spectral density from 10 | 0.0000 | 1115+ | 8515 | |
ADM7154ARDZ-2.8-R7
|
Analog Devices | egulator typical output noise is 0.9 μV rms from 100 Hz to 100 kHz for fixed output voltage options and 1.5 nV/√Hz for noise spectral density from 10 | 0.0000 | 1115+ | 7834 | |
ADM7154ARDZ-2.5-R7
|
Analog Devices | egulator typical output noise is 0.9 μV rms from 100 Hz to 100 kHz for fixed output voltage options and 1.5 nV/√Hz for noise spectral density from 10 | 0.0000 | AD-2017 | 1115+ | 9443 |
ADM7154ARDZ-1.8-R7
|
Analog Devices | egulator typical output noise is 0.9 μV rms from 100 Hz to 100 kHz for fixed output voltage options and 1.5 nV/√Hz for noise spectral density from 10 | 0.0000 | SOIC8 | 1115+ | 3332 |
ADM7154ARDZ-1.2-R7
|
Analog Devices | architecture, it provides high power supply rejection and ultralow noise, achieving excellent line and load transient response with only a 10 µF ceramic | 0.0000 | 1115+ | 3251 | |
ADM7154ACPZ-3.0-R7
|
Analog Devices | egulator typical output noise is 0.9 μV rms from 100 Hz to 100 kHz for fixed output voltage options and 1.5 nV/√Hz for noise spectral density from 10 | 0.0000 | 8ldLFCSP( | 1115+ | 7687 |
ADM7154ACPZ-2.8-R7
|
Analog Devices | egulator typical output noise is 0.9 μV rms from 100 Hz to 100 kHz for fixed output voltage options and 1.5 nV/√Hz for noise spectral density from 10 | 0.0000 | 8ldLFCSP( | 1115+ | 7618 |
ADM7154ACPZ-2.5-R7
|
Analog Devices | egulator typical output noise is 0.9 μV rms from 100 Hz to 100 kHz for fixed output voltage options and 1.5 nV/√Hz for noise spectral density from 10 | 0.0000 | LFCSP-8 | 1115+ | 2710 |
为避免我们发出的报价单被系统误认为垃圾邮件,
我们建议您先把
liyouxingdz@qq.com添加到邮箱联系人或者白名单。