| 型号 | 制造商 | 描述 | 价格 | 封装 | 批号 | 数量 |
|
ADP1706ARDZ-1.2-R7
|
Analog Devices | μF ceramic output capacitor. The ADP1706/ADP1707 are available in 16 fixed output volt-age options. The ADP1708 is available in an adjustable version | 0.0000 | SOP-8 | 1115+ | 9844 |
|
ADP1706ARDZ-1.1-R7
|
Analog Devices | μF ceramic output capacitor. The ADP1706/ADP1707 are available in 16 fixed output volt-age options. The ADP1708 is available in an adjustable version | 0.0000 | 1115+ | 2168 | |
|
ADP1706ACPZ-3.3-R7
|
Analog Devices | The ADP1706/ADP1707/ADP1708 are CMOS, low dropout linear regulators that operate from 2.5 V to 5.5 V and provide up to 1 A of output current. Using | 0.0000 | 1115+ | 9018 | |
|
ADP1706ACPZ-2.5-R7
|
Analog Devices | connected to program the start-up time; the ADP1707 and ADP1708 contain internal soft start capacitors that give a typical start-up time of 100 μs. The | 0.0000 | AD-2017 | 1115+ | 6962 |
|
ADP1706ACPZ-1.2-R7
|
Analog Devices | connected to program the start-up time; the ADP1707 and ADP1708 contain internal soft start capacitors that give a typical start-up time of 100 μs. The | 0.0000 | 1115+ | 2153 | |
|
ADP1706ACPZ-1.1-R7
|
Analog Devices | μF ceramic output capacitor. The ADP1706/ADP1707 are available in 16 fixed output volt-age options. The ADP1708 is available in an adjustable version | 0.0000 | LFCSP | 1115+ | 7596 |
|
ADP1706ACPZ-1.0-R7
|
Analog Devices | LDO Regulator Pos 1V 1A 8-Pin LFCSP EP T/R | 0.0000 | datasheet | 1115+ | 4605 |
|
ADP166ACBZ-2.85-R7
|
Analog Devices | The ADP165/ADP166 are very low quiescent current, low dropout, linear regulator that operate from 2.2 V to 5.5 V and provides up to 150 mA of output | 0.0000 | 4ballWLCS | 1115+ | 5886 |
|
ADP165ACBZ-2.85-R7
|
Analog Devices | current. The low 120 mV dropout voltage at 150 mA load improves efficiency and allows operation over a wide input voltage range. The ADP165/ADP166 are | 0.0000 | AD-2017 | 1115+ | 2452 |
|
ADM7172ACPZ-5.0-R7
|
Analog Devices | just a small 4.7 µF ceramic output capacitor. Load transient response is typically 1.5 μs for a 1 mA to 1.5 A load step. The ADM7172 is available in 17 | 0.0000 | LFCSP8 | 1115+ | 4490 |
|
ADM7172ACPZ-3.3-R7
|
Analog Devices | adjusting the start-up time via the soft start pin. The typical start-up time with a 1 nF soft start capacitor is 1.0 ms. The ADM7172 regulator output | 0.0000 | QFP | 1115+ | 5883 |
|
ADM7171ACPZ-2.5-R7
|
Analog Devices | adjusting the start-up time via the soft start pin. The typical start-up time with a 1 nF soft start capacitor is 1.0 ms. The ADM7171 regulator output | 0.0000 | QFN | 1115+ | 6365 |
|
ADM7170ACPZ-5.0-R7
|
Analog Devices | adjusting the start-up time via the soft start pin. The typical start-up time with a 1 nF soft start capacitor is about 1.0 ms. The ADM7170 regulato | 0.0000 | LFCSP | 1115+ | 4111 |
|
ADM7170ACPZ-3.3-R7
|
Analog Devices | with just a small 4.7 μF ceramic output capacitor. Load transient response is typically 1.5 μs for a 1 mA to 500 mA load step. The ADM7170 is available | 0.0000 | LFCSP | 1115+ | 2113 |
|
ADM7170ACPZ-3.0-R7
|
Analog Devices | adjusting the start-up time via the soft start pin. The typical start-up time with a 1 nF soft start capacitor is about 1.0 ms. The ADM7170 regulato | 0.0000 | 8ldLFCSP( | 1115+ | 5511 |
|
ADM7170ACPZ-2.5-R7
|
Analog Devices | adjusting the start-up time via the soft start pin. The typical start-up time with a 1 nF soft start capacitor is about 1.0 ms. The ADM7170 regulato | 0.0000 | 8ldLFCSP( | 1115+ | 1613 |
|
ADM7170ACPZ-1.8-R7
|
Analog Devices | with just a small 4.7 μF ceramic output capacitor. Load transient response is typically 1.5 μs for a 1 mA to 500 mA load step. The ADM7170 is available | 0.0000 | LFCSP8 | 1115+ | 9469 |
|
ADM7160AUJZ-3.3-R7
|
Analog Devices | input. The ADM7160 is specifically designed for stable operation with tiny 1 μF, ±30% ceramic input and output capacitors to meet the requirements of high | 0.0000 | SOT23-5 | 1115+ | 3941 |
|
ADM7160ACPZN3.3-R7
|
Analog Devices | The ADM7160 is an ultralow noise, low dropout linear regulator that operates from 2.2 V to 5.5 V and provides up to 200 mA of output current. The low | 0.0000 | LFSCP-6 | 1115+ | 7536 |
|
ADM7160ACPZN2.5-R7
|
Analog Devices | input. The ADM7160 is specifically designed for stable operation with tiny 1 μF, ±30% ceramic input and output capacitors to meet the requirements of high | 0.0000 | DFN-6 | 1115+ | 5328 |
为避免我们发出的报价单被系统误认为垃圾邮件，
我们建议您先把
liyouxingdz@qq.com添加到邮箱联系人或者白名单。
服务热线
